For old-fashioned personal service, you can phone your orders in at 800-444-1995.
WHH Enforcer Direct
View Cart
About
My Account
Home
>
Enforcer Boats
>
Enforcer Ready to Run
>
Magnum 57 - 57"
(0)$1,495.95
(0)$1,295.95
(0)$999.95
You save $496.00!
Availability::
Usually Ships in 1 to 2 Weeks
Product Code:
MAGNUM57
Color
White
Yellow
Red
Engine
Modification:
M5 Upgrade [Add $60.00]
None
Radio
No Radio
Include 2PL-2.4G Radio (Futaba) [Add $169.95]
Includes Radio, 4-Cell AA Battery Pack, Hitec 1/4 Scale Steering Servo, and Standard Throttle Servo.
Installed 2PL-2.4G Radio (Futaba) [Add $189.95]
Includes Radio, 4-Cell AA Battery Pack, Hitec 1/4 Scale Steering Servo, and Standard Throttle Servo.
Installed Radio (Futaba Magnum Jr.) [Add $149.95]
Dummy Quads:
NONE
Dummy Quads (Installed) [Add $14.95]
Dummy Quads (Not Installed) [Add $7.95]
Extras
Choke Lever:
CNC Machined Choke Lever [Add $10.95]
Fuel Valve:
Inline On/Off Gas Valve [Add $12.95]
Oil:
Amsoil Saber 100:1 Pre-Mix (Quart) [Add $12.95]
Stand:
Heavy Duty Deluxe Enforcer Boat Stand [Add $28.95]
Velocity Stack:
Enforcer Velocity Stack (Composite) w/ Diffuser Kit [Add $24.95]
NONE
Enforcer Velocity Stack (Composite) [Add $9.95]
Description
Technical Specs
Additional Requirements
If you have big water, we have the boat to tame it... The Magnum 57 is our largest production boat measuring over 57 inches in length ( not including hardware). The hull was designed to be fast and stable in rougher water conditions. This is the perfect boat for big bodies of water running at speed with waves up to six inches. The Magnum 57 can reach speeds over 40 mph, and with the M5 engine upgrade mid 40's are the norm.
When viewing the set-up photos please note that some options are shown but not included and available such as: CNC choke lever, Jumbo gas filter or Jumbo gas filter with mount, Dummy Quad Exhaust Tips, Velocity stack with defuser, CNC gas cap. If you are interested in having these option installed during your boats construction, simply add-on the options from our options box. If you see an option you may like in our online catalog and it is not in the box, please inquire by email or in the comments box and we will contact you with the additional cost, or if the option can not be used.
Finished Weight
- Approx. 20 pounds
Length
- 57"
Beam
- 14.5"
Free board (Height)
- 7"
Range of Operation
- Idle, Mid-range, and Full Speed operation
Ideal Conditions
- 2" - 4" chop
Operational Speed
- can exceed 40 mph
Engine
- XForce XF26WCC (assembled in USA) 3hp @ 12,500 / M5 upgrade - 4 hp @ 15,500 rpm
Fuel Capacity
- 24 oz
Average Run Time
45-60 minutes
RADIO BOX SEAL TAPE
- used to secure and seal plexiglass top to radio box (mandatory requirement)
AMSOIL 2-CYCLE PREMIX OIL
- 100:1 SABER SERIES PREMIX OIL designed specific for high reving 2-cycle engines. Available in 8oz or 1qt bottles. Required mixture 6oz/gal (mandatory recommendation)
QUALITY BOAT STAND
RADIO SYSTEM
If you purchase the Magnum 57 leas radio a two channel radio system is required for operation. We highly recommend that a 1/4 scale servo is used for the steering as we have designed the radio box tray to accept one. A standard servo can be used for the throttle. We offer different radio systems as options and will install them at the time your boat is being manufactured. There are options for radio systems available during the time of check-out. Please email or call us if you have any additional questions.
POWER SOURCE
Transmitter 4 or 8 AA alkaline or rechargable 1.5V batteries ( not included )
Receiver 4 AA alkaline (included) or 5-cell Sub-C rechargeable 6V pack ( available as option )
Features
HULL
-
FIBERGLASS HAND-LAID CONSTRUCTION
FLAWLESS GELCOAT FINISH IN YOUR CHOICE OF RED, YELLOW, OR WHITE
STRINGERS - 1/2" X 9 PLY BIRCH, 5" INDUSTRY STANDARD RAIL SPACING
ENGINE
-
POWERED BY: XForce XF26WCC ( assembled in the USA ) WITH CLUTCH 2.9HP @ 12,000 RPM
OPTIONAL ( XF26WCCM5 ) ENFORCER PREPARED M5 FACTORY MODIFIED 4HP @ 15,000 RPM
HEAVY DUTY CENTRIFUGAL CLUTCH WITH DUAL BEARING SUPPORT
HARDWARE
-
ALL COMPONENTS 100% CNC MANUFACTURED IN AIRCRAFT GRADE ALUMINUM MADE IN THE USA
FULLY ADJUSTABLE TO ALL WATER CONDITIONS
SPD-III ADJUSTABLE SURFACE DRIVE
DUAL RUDDER SYSTEM
STAINLESS STEEL ADJUSTABLE TRIM TABS (2)
1/4" PROP SHAFT WITH SQUARE END FERRULE
1/4" SOLDER-LESS DRIVE CABLE
THRUST WASHER
PROP NUT
PROPELLER
- ALUMINUM BALANCED 75MM X 105MM
FUEL SYSTEM
-
24 OZ. ENFORCER EASY-FILL FUEL CELL
MOLDED POLYETHYLENE
EXHAUST
-
ENFORCER PRO WET TUNED (WATER-COOLED) CONCEALED PERFORMANCE SYSTEM
WATER PUMP FOR CONTINUOUS WATER AT IDLE. OPERATES VIA ENGINE VACUUM, NO ADDITIONAL POWER SOURCE REQUIRED
EXTRA
-
1/2 ISO-PAD 4 POINT RUBBER MOUNT SYSTEM
FLOATATION - 2 PART INJECTED LIGHT WEIGHT FOAM
TRANSOM MOUNTED WATER PICK-UP REDUCES RISK OF DEBRIS
Related Products...
Team Enforcer Pro - 46"
Sting Ray - 50"
Demon
Man-O-War - 52"
(0)$999.95
Add
(0)$1,295.00
Add
(0)$1,199.95
Add
(0)$999.95
Add
Manta Ray - 55"
57 Old School - 57" Offshore Racer
Monster Magnum - 57" Boil Water Without a Flame!
Silex Pro - 47"
(0)$999.95
Add
(0)$999.95
Add
(0)$2,295.00
Add
(0)$1,249.95
Add
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Enforcer Boats
>
Enforcer Ready to Run
Featured Products
Magnum JR with 1/4 Scale Servo
$149.95
Machined Gas Vent
$3.95
Enforcer Fuel Control Valve (one way valve)
$9.95
One Way Air Vent
$12.95
Radio Safeguard
$24.99
57 Old School Hatch Cover
$59.95
Manta Ray Hull
$279.95