Now you can purchase the RMB clutch assembly same as used on most ready to run Enforcer boats for the, XForce, Zenoah , CY, RCMB, and other 23cc - 30cc engines with similar crank case design.
This bolt-on assembly provides you a heavy duty clutch that we have been using and selling for over 15 years. The housing is made of injection molded Glass-Filled-Nylon and carries a lifetime replacement warranty if it should fail.

The output shaft features a square ( female ) adapter for use with 1/4" square end cable shafts.
NOTE: When measuring a square end cable, measure from point to point not the flat surface.

The extended nose provide additional cable support if your engine has to be mounted more than 2 inches forward of the shaft tube. A good rule of thumb is not to leave more than 3 inches of exposed cable between the engine and shaft tube or you can risk that the cable could start to whip causing damage and possible injury.

We also a universal mount that bolts directly to the clutch housing and fits between industry standard 5 inch rail spacing.

This clutch system is designed to work with our Nylon Nose Mount which seals to the shaft tube and will not allow water to enter the hull through the shaft tube. You can see this exclusive design in use on all Ready to Run Enforcer boats that are manufactured with a clutch.